Низкопольный ЯМР-анализ для исследования сшивки каучука

Low Field NMR Analysis for Investigating Rubber Crosslinking Density

The degree of crosslinking, also known as плотность сшивки, is typically quantified in terms of crosslink density, which represents the number-average molecular weight between two adjacent crosslink points or the number of moles of cross-link points per cubic centimeter. Rubber with a lower degree of cross-linking exhibits better elasticity, while rubber with a higher degree of cross-linking tends to have reduced elasticity. As cross-linking intensifies, mechanical strength and hardness increase, eventually leading to a loss of elasticity.

The degree of crosslinking in rubber has long been a challenge in the industry. Conventional swelling methods offer limited testing accuracy and are susceptible to significant human subjectivity. В отличие, the NMR method leverages the changes in the polymer relaxation decay curve with variations in the internal sample components’ state. It employs NMR relaxation technology to swiftly and non-destructively determine the degree of cross-linking by discerning signals from both cross-linked and non-cross-linked chains.

In polymer samples, the solvent component exhibits significant fluidity and slow decay, non-cross-linked segments display some molecular motion characteristics with relatively slower decay, while cross-linked segments are tightly bound, exhibit minimal molecular motion characteristics, and decay faster. Using the innovative MSE-CPMG sequence acquisition, NMR signals are rapidly reversed within the dead time range through combined pulses, preserving the original NMR signal intensity. This approach allows for the collection of shorter relaxation information, further enhancing the accuracy of плотность сшивки измерения.

Principle of Low-Field NMR Analysis for Rubber Crosslinking

Технология низкопольного ЯМР-анализа использует импульсы для возбуждения протонов водорода в образцах материалов., заставляя их резонировать. Впоследствии, после прекращения пульса, протоны водорода релаксируют, с различным временем релаксации протонов водорода в разных состояниях внутри образца. The analysis of relaxation signals enables the direct or indirect assessment of material properties. The low-field NMR method utilizes low-field nuclear magnetic resonance analysis to evaluate the movement of hydrogen molecules along the hydrocarbon chain, assessing the sample’s cross-linking degree according to a relaxation analysis model. This testing process eliminates the need for chemicals, is non-destructive to the sample, and offers rapid results, often completing tests within 3 минуты.

Components of a Low-Field NMR Analyzer

A typical NMR плотность сшивки meter comprises several key components:

Control Unit: This includes the control core and an interface for human-computer interaction.
Магнитный блок: Responsible for generating radio frequency excitation and collecting signals.